Forums » Big Bores

Range results 416 Rem Magnum

    • 110 posts
    July 4, 2010 11:41 PM EDT

    Really this is to show the velocities achieved so others can deduce their loads. Target Distance 50 Yards, Temp 80 deg+, Vel measured 10' from muzzle.

    WARNING - DO NOT FOLLOW THESE LOADS - WORK UP YOUR OWN USING A RELOADING MANUAL

    Bullet Nosler partition 400 grains,

    Powder reloader 15 - 79 grains

    Avg vel 2359

    Bullet Barnes banded solid 400 grains,

    Powder reloader 15 - 77 grains

    Avg vel 2354

    Bullet Swift A Frame 400 grains,

    Powder reloader 15 - 77 grains

    Avg vel 2316

    Bullet Swift A Frame 400 grains,

    Powder reloader 15 - 78 grains

    Avg vel 2373

    Bullet Swift A Frame 400 grains,

    Powder reloader 15 - 79 grains

    Avg vel 2417

    The barnes solid and the swift A frame shot to the same point of impact at 50 yards. I feel the solid's charge can be increased by one grain! Group sizes were around .50" at 50 yards.

    • 10 posts
    December 15, 2010 2:35 PM EST
    • 10 posts
    December 15, 2010 2:36 PM EST

    These bullets were recovered from a Cape Buffalo and are Swift A-frames and Barnes solids from a .416. I handload everthing I shoot. I have not chrono'd my loads but the data suggests around the same as what you have posted.

    • 14 posts
    June 9, 2011 11:09 PM EDT
    wow that is a lot of speed with big pellets!
    I am working on some 500gr loads in my 1895 SS 45-70 GOV
    for up close and personal black bear hunting...yes it is a lot more then needed but ...I do hunt from the ground and I walk into bait sites, some big boars take offence to that lol!
    • 110 posts
    June 12, 2011 9:58 AM EDT
    Bears are tough animals. I shot a medium sized one with a 375 H&H dead center in the chest, expected him to pole axe but he took off like a cat on a hot tin roof! My second shot dropped him, he would have died from the first shot also, but that just goes to show how tough they are!
    • 14 posts
    June 14, 2011 7:43 PM EDT
    I hunt bears on the ground up close and personal...an unspoken rule with the folks I hunt with is to never shoot a bear in the chest when on the ground and less then 40 yards...they will run over you on the way out of dodge!
    • 21 posts
    July 8, 2011 2:42 AM EDT
    I shot cape buffalo from a distance of 40 yards with 400 gr Swift 'A' frame bullet loaded close to 2400 ft/sec with 75 gr of AR 2208 (Australian powder) from my custom built .416 Rem rifle. The shot hurled the buffalo to the ground after exiting from the opposite shoulder. Death bellow started to emit as the buffalo tried to gain footing and died less than 10 yards from where it was first shot. The exit wound was double the caliber size indicating excellent expansion. No wonder the .416 puts the buffalo down faster than a .375 H&H
    • 14 posts
    July 10, 2011 10:12 PM EDT
    take a look at the Garret cartrige site and the penetration test!
    45-70....thats what I shoot lol!
    I do love the history and romance of the 416 though and will get oune sooner or later