Hi Guys,
I have been trying to build a 260 Rem on a Winchester 70 controlled round feed action, preferably in a stainless action. I am unable to source Winchester 70 stainless steel action so far from Australia. At the end I realised that the only way to get this done will be to buy a used or new Winchester 70 rifle, either in a .243 Win or .308 Win caliber and have a competent gunsmith rechamber/ rebarrel it to 260 Rem. I would like a lean profile barrel that should not exceed 24" and the rifle weight not to esceed six and a half pounds. I like the featherweight stock with out the schnabel fore end, which should be replaced by an ebony fore end. Much appreciate any help from you.
Cheers, Shivashankar