Forums » Small Bores

260 Rem

    • 21 posts
    February 21, 2010 2:54 PM EST

    Hi Guys,

    I have been trying to build a 260 Rem on a Winchester 70 controlled round feed action, preferably in a stainless action. I am unable to source Winchester 70 stainless steel action so far from Australia. At the end I realised that the only way to get this done will be to buy a used or new Winchester 70 rifle, either in a .243 Win or .308 Win caliber and have a competent gunsmith rechamber/ rebarrel it to 260 Rem. I would like a lean profile barrel that should not exceed 24" and the rifle weight not to esceed six and a half pounds. I like the featherweight stock with out the schnabel fore end, which should be replaced by an ebony fore end. Much appreciate any help from you.

    Cheers, Shivashankar

    • 8 posts
    April 22, 2010 7:07 PM EDT
    Hi Shiva
    You should be able to get a secondhand 243 or 308 for around $800 or less. The 260 will be a great caliber - identical in performance to the 6.5X55 Swed (I had a Sako & a Mod 70 push feen in that caliber).

    I would go for a 22 inch barrel with a 1 in 7.5 twist so that I could use 160 gr bullets if I want to shoot larger deer. You caould also use 125 gr Nosler partition for 2900 fps & great results - very close to 270 Win performance!
    • 21 posts
    April 22, 2010 8:41 PM EDT
    Thanks for the tip Ashok. I actually did better than that. I bought a new Winchester 70 SS Ultimate Shadow in .243 Win for $600.00 through GUNBROKER. Jeff Sipe from Montana Rifle Company has promised to build this rifle for me. He is in the process of working out the logistics. I agree that .260 Rem is a fantastic caliber for hunting medium sized game with either 240 or 160 gr premium bullets. This would also be great to carry on your New Zealand mountains and a heavier bullets are less wind sensitive than a .243 projectiles.
    • 14 posts
    July 31, 2010 9:54 PM EDT
    I have shot a lot of guns at long range and I would not me so quick
    to judge the little .243win with 107gr bergers it wreaks havoc on the gongs at 1 mile!!!! but I to like heavier bullets when practical
    heck I am using a 405gr bullet for black bear lol (45-70Gov.) I am currious as to the ranges you want to use this .260Rem at?
    and have you looked at the data for 6.5x284Lap ? this of course would only be useful if you were wanting a true long range rig.
    I am in know way bashing the 260 Rem as I am sure it is well up to the task for your hunting ...just offering a different spin on shooting in general thats all.. Jonathan