-
Posted by
steve21 August 6, 2009 -
717 views
This sound advice from a long - time deer hunter who turned to a crossbow can help you eliminate costly mistakes.
For the second time, I've made the transition from lead to steel hunting projectiles.
The first involved the infamous switch from lead to steel shot for water fowling. The second occurred as a life - long deer hunter went from bullets to broadheads.
A taste for venison and growing deer populations in southern Ontario that offer additional hunting opportunities are all the incentives most rifle - or shotgun - toting deer hunters need to pick up a bow or a muzzleloader.
I chose the bow because hunts can be planned during the long archery season to fit a busy schedule. The crossbow was my primitive weapon of choice for simple reasons. I don't have the visual acuity of earlier years, so a 4 X scope gives the assurance of a solid aim point. Also lacking is the pure physical strength and agility of earlier years, which I felt would be required to draw and hold a steady mark with a longbow or a compound. A clean, quick kill is the top priority, and a crossbow allows for more certainty of this result.
I've shot at, quickly killed, and recovered six deer in three years since picking up the bow. Here are some basic insights that can help you achieve a smooth transition from lead to steel.
KNOW YOUR RANGE
As a rifle hunter, I thought a powerful crossbow with a scope would be roughly equivalent to a muzzleloader within 50 yards.
What an awakening. Considering all the factors affecting aim over the past three years, I've set a 30 - yard limit on the shot I will take.
Measuring and staking out the 30 - yard distance from your deer stand is a good reference. Practising shooting targets from the stand is the most practical method of knowing exactly what your bow will do in a hunting situation. If you don't hunt from a stand, or you move a portable stand around a lot, practise shooting in a variety of situations. This will show you how hard it is to get a clear shot from the ground and the difficulties of estimating range from any location. Seeing how twigs and weeds deflect bolts will deter you from taking shots through cover. The other factor in limiting range is the reaction of deer to the sound of the bow being fired.
Crossbow mechanisms are noisy. Sound travels more than three times faster than bolts, and the chance of a deer " jumping the string " increases greatly with distance.
GETTING OFF THE GROUND
I hunted from the ground during the first season. This gave me an appreciation of the limitations of hunting whitetails on the ground with a bow. I still ground hunt on occasion, but a couple of well - placed 20 - foot towers provide most of my venison.
Deer stands allow you to rise above the zone where deer are more likely to detect your scent. Deer trust their sense of smell and will almost always react by snorting, freezing, and leaving when they find a safe route. Hearing is a close second to smell, and sight a distant third. Although deer often hear or catch the movement of a hunter in a stand, their reaction is often subdued.
Remain quiet and motionless, only bringing up the bow when deer are looking away.
Clear brush from deer travel lanes around your stand. And, again, practise from it to get your aim points at a variety of ranges. The aim point will vary quite a bit with relatively short changes in distance. Learn to compensate for the elevation by taking close - in shots and moving the target out to the farthest range. Bow hunters in tree stands often shoot over deer at close range.
TAKING THE SHOT
A standing broadside shot in the critical heart - lung area behind the shoulder will quickly bring down the animal and ensure it doesn't travel far if it reaches cover. To make this shot, there needs to be a clear flight path for the bolt - but this is just the starting point.
Crossbows are fairly bulky, especially at full draw. Shooters need to be conscious of the environment surrounding the bow as they bring it up to shoulder and ensure the front of it is unobstructed. The bow flexes far forward at discharge, and should a limb contact an obstacle like the blind, a tree trunk, or branches during discharge, the bolt will be deflected. The bow might even break.
As a deer moves into range, keep thinking and breathing. Take a visual check of the area around the bow and go through a mental check - list of items that need to be clear before you pull the trigger. At this point, little things really matter. Be sure the bolt is notched tight to the string and flush to the flight track. If your scope contains several crosshairs, use the one appropriate for the range. Quietly slide off the safety, keep your fingers " CLEAR " of the string path, and hold for that standing broadside opportunity.
It is very important that your fingers never extend into the string path, this is a mistake you will only ever make once in a life time.
Please feel free to comment, however keep in mind this was written for those individuals that are not seasoned archery hunters and are seeking a start at a very exiting way to broaden there hunting abilities and rewards.