The Crossbow

  • The Crossbow

    There seems to be a lot of controversial misunderstanding amongst hunters afield, when it comes to Crossbows. There’s a growing move among hunters, both novices and veterans alike, towards using crossbows, especially for white-tail deer. The reasons are simple. Deer herds are burgeoning to the point that additional tags are available to hunt multiple deer in many areas across North America, including in Ontario. The catch is, for the most part, extra tags are more easily available to archers or muzzleloaders.
    As well, archery seasons are measured in months, not weeks, as are many gun seasons.
    Traditional gun hunters are taking note of these opportunities and making the switch to crossbows, instead of longbows or compounds, because they’re easier to use and handle much like their current firearms – stock, scope, and all – with bow limbs and string replacing the barrel. However, that is where the similarities end. Here are some of the opportunities you need to know before starting your journey with a crossbow.

    Archery hunting dates back to 25,000 BC when the first stone arrowheads were made in Africa. These stone heads were probably used on short spears or primitive stick bows, but it wasn’t until 341 BC, at the battle of Ma-Ling in China, that the first historical record of crossbows emerged. Back then, becoming skilled longbow archers took years of training, proper nutrition, and strength building. Their bow draw weights were 90 – 110 pounds and these warriors could shoot an arrow out to 200 – plus yards at the rate of 10 to 12 arrows per minute, but fatigued archers quickly lost their edge and endurance. By contrast, crossbow archers could be trained in a matter of days, mainly because building archery muscles was not a factor, plus accuracy was attained in short order. A master archer decided the angle to shoot at, and the grunts followed suit. All crossbows being of the same poundage, the arrows ( bolts, quarrels ) ranged the same distance. Not surprisingly, emperors and kings championed the crossbow until 1550 to 1600 AD, when firearms virtually eliminated bows of any type in warfare. Today, the use of bows for hunting has been cyclical and is now on the high end, as extended bow – hunting seasons draw many hunters from different disciplines to take up the crossbow.

    Understanding Crossbows:

    Crossbows come in a variety of draw weights to suit the type of shooting one intends to do. This can be the joy of target shooting or the excitement of hunting anything from cottontails to moose, bear and whitetails in Ontario. Big – game hunting crossbow weights generally run from 150 to 225 pounds, far exceeding ministry of natural resources ( MNR ) mandatory minimum poundage’s and draw lengths for crossbows used when hunting different animals. For wild turkey, black bear, moose, and deer, crossbows must have a draw length ( measured along the bolt ramp from the outer edge of the main limb to the anchor point / release – latch mechanism ) of at least 11.8 inches at full draw. Draw weights must be at least 99.2 pounds for turkey and deer, and 119 pounds for moose and bear. There are two basic types of crossbows: compound and recurve or straight limbed. Compounds are different to cock than recurves, since they start out hard to draw and get easier at the top of the power stroke, whereas recurves are the opposite. Compounds are heavier than traditional hunting recurves, which range from just over 5 pounds to 7 pounds. Solid – limb compound crossbows, on the other hand, can weigh up to 8.5 pounds. This is because of the extra hardware – cams, and cables. Manufactures have recognized this and some have moved to split limbs, to lighten the bow, but most also claim a multitude of advantages, such as quietness, faster bolt speed, better accuracy, and increased durability. Recurve crossbows are, however, still get – the – job done tools with fewer moving parts to go wrong. Before purchasing, try both to see which you are more comfortable with.

    Let’s Quarrel:

    The main purpose of a crossbow is, of course, to propel a bolt. Wooden arrows, the norm in the early age of crossbow hunting, are seldom used these days. Aluminum or carbon shafts are the preferred choice and both work well. Carbon bolts, however, have fibre memory, making them more durable. They also eliminate kinking or bending – as can happen with aluminum shafts – and, in the long run, are more accurate. Carbon bolts, though, come at an extra cost – up to $ 50 for a pack of five. The same number of aluminum bolts can be had for either side of $ 30. Keep in mind that carbon bolts and feather fletching are much lighter and could drop below specs and damage the crossbow. So, if you’re switching from aluminum to carbon shafts, make sure the overall bolt mass
    ( bolt, nock, fletching, and broadhead ) and diameter meet the manufacture’s weight specifications. Practice points should also be same weight as the broadheads you intend to hunt with. Bolt fletching is usually constructed of either plastic or feathers. Although plastic is more durable, feathers are more forgiving and correct trajectory more quickly over a short distance. Bolts are normally dressed with three 4 t0 5 inch fletches offset slightly to impact spin to the bolt. Spin helps straighten the bolt in flight to the target. If fletching your own bolts, avoid too much offset or “ helical,” as it will create excessive friction when the fletch travels in the slot upon release.
    Accuracy will be lost and the bolt might try to climb out of the track. On a three – fletched bolt, the cock feather, used to load the bolt the same way every time, is a different colour. In archery, consistency matters. Bolts nocks may be flat or half – moon shaped. Flat nocks allow placement of any fletch in the deck slot, making them more versatile, whereas the half – moon needs the cock fletch in the slot and more attention when being loaded. The first choice of broadhead is the one the manufacturer recommends, and if that doesn’t work for you, borrow as many different types from your buddies as possible to try. Crossbows can be finicky when it comes to broadhead choice, so take the time to find one that flies best from your bow. Three – blade broadheads have better aerodynamic stability than two blades. Open – on – impact broadheads have made ground by nature of their compact design. They fly similarly to target points, thus hitting the target butt close to, if not in, the same place. They might be another option for you. Your local archery shop might know which broadhead works best for your crossbow and save you time experimenting. No matter which types of broadhead you choose, practice with them before hunting with them. Broadheads don’t need to be installed in – line with the fletching, but to maintain accuracy, all should follow the same relationship with it. This means if one broadhead is half a turn between the fletch, then all the broadheads should be a half a turn out. Keep in mind that MNR regulations dictate a hunting bolt head must be at least .87 inches at the widest point and have at least two cutting edges of straight, sharp, unserrated, barbless steel.

    The New Standard:

    Fred Bear may have carried arrows for his longbow in a leather case slung over a shoulder, but bow – mounted quivers are common to most crossbows these days. Some are attached parallel to the limbs and others to the stock. A quiver parallel to the stock is most practical, since it’s less prone to catching on branches when moving through the bush. Unless still hunting or stalking is their forte, most hunters remove the quiver once they’re in a stand. It makes the bow less cumbersome and easier to maneuver. Remember, if you hunt with the quiver removed, practice with it removed. The difference in weight is all it takes to throw off your technique and accuracy. Checking bolts regularly for damage should become second nature. Some quivers are not kind to broadheads, so periodically check them for sharpness during the hunting season. This can be done by carefully and lightly sliding the edge of the broadhead away from you across a thumbnail. If it still has a surgical edge, it will catch on the nail. The best time to get the feel for the sharpness of broadheads is right from the packet. Although re – sharpening solid broadheads is an option, those with replaceable blades are easy to use. At the end of each hunting season I retire my broadheads to practice heads for the next season. This means a fresh start with new, sharp broadheads each season. The first time setting up a crossbow for a hunt can seem daunting, but after the first season everything will fall into place and you’ll wonder why you didn’t get into crossbow hunting sooner. After all, a crossbow will let you expand your hunting season. Now some simple safety tips I would like to share with our hunters that are starting out or are using a crossbow for the first time. Proper handling and technique are essential when using a crossbow.
    • when cocking the bow by hand or rope aid, double check that your foot is firmly in the anchor stirrup. The thought of a crossbow propelled towards you at 200 feet per second is not a pleasant one. ( I have personally seen one fellow break his jaw in 3 places )
    • don’t haul a loaded crossbow into a tree stand. Ensure the trigger safety is always engaged until ready to shoot. Always load the arrow with bow pointed at the ground
    • don’t dry fire a crossbow. Bow damage might result and you might be injured.
    • Before sqeezing the trigger, double check that your fingers, or thumb are clear of the travel. Ouch !
    • To avoid serious injury, make sure when firing the crossbow that its limbs can’t come into contact with branches or any part of the tree stand our blind and I did say “ can not come into contact”.

    As always, this is just my story and experiences, hope some of this info helps someone with making a decision to continue our heritage and do it safely.

    Steve.
5 comments
  • flyillustrator
    flyillustrator Wow great artical as always. I already knew you were a great writer though - I've seen I don't think I'd feel to confident trying a bow yet 'eeekk'
    August 20, 2009
  • Moosecaller
    Moosecaller Some very, very, good advice Steve. And for some of you hunters that might happen to have an older crossbow like I do, Always check to make sure your bolt/arrow is properly knocked. Nothing worse than fireing an arrow/bolt that has fallen off its knock.
    Fred
    August 20, 2009
  • papabuda
    papabuda I agree with moose caller good edvice,I hunt with bolth gun and crossbow,bear and white tails and some partridge.Another advantage of using a bow I find that some times you are in the peek of the rut when bow season opens well some times wheather depending..
    August 20, 2009
  • JohnV
    JohnV wow, someone has way to much time on thier hands
    August 21, 2009