When the planter is used, it must be disassembled and maintained, otherwise it will cause rusting of the planter and affect its use in the coming year, so what should be paid attention to when disassembling the planter?
I. Preparation before Disassembly
1. Before disassembling the Planting Machine, it is necessary to have a detailed understanding of the structural principle and transmission mode of all parts of the seeder, as well as the structural characteristics, uses and mutual cooperation of the parts.
2. Prepare a clean and convenient working site for safe and civilized disassembly and repair of the seeder.
3. Select the appropriate disassembly method and reasonably arrange the disassembly steps of the seeder.
II. Precautions for Disassembly
1: Use disassembly tools and equipment correctly. When disassembling the seeder, special tools and equipment shall be used or selected as far as possible. Avoid knocking and beating indiscriminately to prevent parts of the seeder from being damaged or deformed. For example, a wheel puller or press should be used to disassemble the coupling, rolling bearing, gear and pulley of the seeder. When removing bolts or nuts, try to use spanners with the same size.
2. Choose reasonable disassembly procedures. The disassembly sequence of the seeder should be opposite to the assembly sequence. After the engine is turned off, the power of the seeder is cut off and the power transmission shaft is separated. Generally, it is carried out from the attachment to the main machine, from the outside to the inside and from top to bottom. The whole machine is disassembled into components, then the components are disassembled into components, and finally the components are disassembled into parts.
3: Select the appropriate disassembly method. We should try our best to avoid dismantling the connection of the seeder that is not easy to dismantle or the connection that will reduce the connection quality and damage some connecting parts of the seeder after dismantling, such as sealing connection, interference connection, riveting and welding for the seeder. However, if it is difficult to judge its technical status without disassembly, but it may cause faults, it must be disassembled.